FASCO NJK110022626-1 Hvac Combustion Air Blower 70581624J

( Brand: Fasco ), ( Manufacturer Part Number: NJK110022626-1 ), ( Model: JK110022626-1 70581624J NJK110022626-1 ), ( Part Type: Hvac Blower ), ( Voltage: 115 V )

Review FASCO Hvac Combustion Air Blower

The **Fasco NJK110022626-1 HVAC Combustion Air Blower (JK110022626-1, Part #70581624J)** is a high-performance, direct-drive centrifugal blower meticulously engineered to deliver reliable and efficient combustion air supply for residential and light commercial HVAC systems. Designed with precision and built to meet strict industry standards, this blower is a critical component in ensuring safe and optimal operation of gas-fired furnaces, boilers, and water heaters by providing the necessary airflow to support complete combustion. Its robust construction features a **7-inch diameter impeller** paired with a **direct-drive motor**, eliminating the need for belts or pulleys, which reduces maintenance requirements and enhances durability. The motor is fully sealed and protected against moisture and contaminants, making it ideal for installation in attics, basements, or utility closets where environmental conditions may vary. The blower s **smooth, low-noise operation** is achieved through balanced impeller design and precision machining, ensuring minimal vibration and extended component life. With a **maximum airflow capacity of approximately 1,100 CFM (cubic feet per minute)** and a **static pressure rating of up to 0.5 inches of water gauge (WC)**, this blower is well-suited for applications requiring moderate to high airflow demands while maintaining energy efficiency. Its **compact yet sturdy housing** is constructed from durable materials, including reinforced plastic or metal components, to withstand the rigors of continuous use. The unit is also equipped with a **quick-connect outlet**, simplifying installation and ensuring a secure, leak-proof connection to ductwork. Whether integrated into a new HVAC system or used as a replacement for an aging unit, the Fasco NJK110022626-1 delivers dependable performance, helping to prevent backdrafting, improve combustion efficiency, and extend the lifespan of gas-burning appliances. Its compatibility with a wide range of furnace and boiler models, along with its straightforward installation process, makes it a versatile and cost-effective solution for professionals and DIY enthusiasts alike.

### **Pros and Cons of buying a Fasco NJK110022626-1 HVAC Combustion Air Blower (JK110022626-1 / 70581624J)**

1. **Compatibility with Common HVAC Systems** This blower is designed for use with natural gas, oil, or propane furnaces, making it versatile for residential and light commercial applications. It is often specified for systems requiring **110 CFM (cubic feet per minute)** of combustion air, which is standard for many mid-sized furnaces.

2. **Reliable Brand Reputation** Fasco is a well-known manufacturer in the HVAC industry, producing durable components that meet industry standards. Their products are widely used in commercial and residential installations, suggesting a level of trustworthiness.

3. **Direct Replacement Part** If your existing system requires a **110 CFM combustion air blower with a 1-inch duct connection**, this part is likely a direct fit, reducing installation complexity and ensuring proper airflow for safe combustion.

4. **Energy Efficiency Considerations** Proper combustion air supply prevents backdrafting and inefficient burning, which can improve furnace efficiency and reduce energy waste over time.

5. **Ease of Installation** As a standard component, it should be relatively straightforward to install, especially if you have basic mechanical skills or are working with a technician familiar with HVAC systems.

6. **Cost-Effective for Replacement** Purchasing a new OEM (original equipment manufacturer) part rather than a generic aftermarket alternative can prevent long-term issues caused by poor-quality materials or improper sizing.

---

1. **Potential Overkill for Smaller Systems** If your furnace requires **less than 110 CFM** (e.g., a very small gas furnace), this blower may provide **excessive airflow**, leading to wasted energy or operational inefficiencies. Always verify CFM requirements before purchasing.

2. **Limited Availability of Spare Parts** While Fasco is reliable, some older or less common models may have discontinued parts. Ensure the blower is still in production or has readily available replacements before buying.

3. **No Variable Speed or Smart Features** This is a **fixed-speed blower**, meaning it does not adjust airflow dynamically. If your system requires precise combustion control (e.g., in high-efficiency condensing furnaces), a variable-speed model might be more appropriate.

4. **Installation May Require Professional Help** If you re unfamiliar with HVAC systems, improper installation (e.g., incorrect duct sizing, sealing, or electrical connections) could lead to **carbon monoxide leaks, reduced efficiency, or system damage**. Consulting a licensed technician is advisable.

5. **Price Sensitivity** Compared to generic or aftermarket blowers, this OEM part may be **more expensive**. If budget is a concern, alternatives (e.g., **Fasco-compatible generic blowers** or refurbished units) should be considered though quality may vary.

6. **Potential for Counterfeit or Fake Parts** When purchasing online (especially from third-party sellers), there is a risk of receiving a **counterfeit or low-quality replica**. Buying directly from authorized dealers or reputable suppliers (e.g., HVAC specialty stores) minimizes this risk.

---

The **Fasco NJK110022626-1 combustion air blower** is a **reliable, high-quality replacement part** for mid-sized furnaces requiring **110 CFM of combustion air**. It offers **durability, brand trust, and proper sizing for many standard applications**, making it a strong choice if your system matches its specifications.

However, **careful consideration is needed** to avoid overpaying for a part that may not fit your exact needs. **Key factors to verify before purchasing:**

- **Exact CFM requirement** of your furnace (110 CFM is standard, but some systems need less).

- **Duct size compatibility** (1-inch connection is typical, but confirm with your system s manual).

- **Installation expertise** if unsure, hire a professional to avoid safety hazards.

- **Source legitimacy** purchase from authorized dealers to avoid counterfeit parts.

If your furnace **requires less than 110 CFM** or has **specialized needs** (e.g., condensing furnace with variable airflow demands), exploring alternatives (e.g., **Fasco s variable-speed models or lower-CFM blowers**) may be more cost-effective.

---

Your furnace **exactly requires 110 CFM** of combustion air.

You have **confirmed duct and electrical compatibility**.

You are **comfortable with installation** or have a technician available.

You prioritize **brand reliability and long-term performance**.

Your system needs **less than 110 CFM** (risk of oversizing).

You require **variable-speed or high-efficiency features**.

You find a **genuine, lower-cost alternative** (e.g., a tested refurbished unit or a compatible generic part).

You are purchasing from an **unverified seller** (risk of fakes).

- **Check your furnace s manual or consult a technician** to confirm the exact blower requirements.

- **Compare prices** from multiple authorized suppliers (e.g., HVAC distributors, Fasco s official website, or reputable online retailers).

- **Inspect the part upon arrival** ensure it matches the listed model number and appears new.

For most **standard natural gas/oil furnaces needing 110 CFM**, this is a **solid, dependable choice**. However, **always verify fit and function** to avoid unnecessary expenses or safety risks.

Details:

Most of the parts require specific knowledge and skills to be installed properly.

part #: njk1100226261 prices

• $40.00-$75.00

specifications fablowehva:

• brand: Fasco
• mpn: Njk110022626-1
• model: Jk110022626-1 70581624j Njk110022626-1
• part type: Hvac Blower
• voltage: 115 V

seller fablowehva:

• city: Princeton, Kentucky
• # reviews: 118
• rating: 97.4%

shipping fablowehva:

• cost: $11.23
• transit: 3-9 Days
• class: Standard
• carrier: USPS
• type: Calculated
• service: USPS Ground Advantage

payments fablowehva:

• credit card: Diners-club
• other
• wallet: Google-pay

offer fablowehva:

• best offers: True
• options: Ship-to-home
• started: February 4, 2026
• quantity: 1
• availability: In Stock
• sold: 0

returns fablowehva:

• policy: No Returns

general fablowehva:

• condition: Used
• HVAC Refrigeration > HVAC Refrigeration: Parts Accessories > HVAC Refrigeration: Fans Blowers

Fasco NJK110022626-1 Is Similar To:

• 1-6010 Fasco Blower Wheel Universal (26.4% similar) New old stock. Wheel for sale is pictured - entirely. Includes not packaging. Wheel is new - unused and undamaged from distributors bulk inventory not packaged for retail...(September 26th, 2017)
• 1-6027 Fasco Blower Wheel Universal (26.4% similar) Blower wheels are new - unused and undamaged from distributor bulk inventory not packaged for retail includes no packaging. New old stock. From distributors overstock. Blower wheel pictured is typical...(January 12th, 2018)
• 1-6053 Fasco Blower Wheel (27.1% similar) 5/1 8 width in.: 3 rotation: cw opposite hub end bore in. Wheel diameter in.: 5/1 6MAX rpm: 3600...(July 9th, 2018)
• 1-6058 87106058 Fasco New Blower Wheel Bore Aisle (26.7% similar) ...(November 28th, 2018)
• 1-6078 Fasco Blower Wheel (27.1% similar) Brand new unused taken from old stock...(April 15th, 2018)
• 1-6160 Fasco Galvanized Blower Wheel Bore New (32.8% similar) KIA qty 7 -8OZ. 1 Fasco galvanized blower wheel 1 60BORE size: 5/1 6 max rpm: 6300DIA: w: 1-1 4 SGML inlet whl cw condition: new, old inventory...(March 16th, 2018)
• 1054268p Fasco Blower Inducer Motor Express Shipping (22.8% similar) Good condition...(May 22nd, 2018)
• 10k3701p Fasco Inducer Blower Motor (30.2% similar) New been on shelf for a while 1AMP 3000RPM 60HZ type U21B AI E62640...(March 4th, 2018)
• 10w59 Fasco Draft Inducer Blower Motor Assembly Lennox (30.4% similar) My loss is your gain. This part worked flawlessly but it was discovered shortly after that the heat exchange leaking and decided to scrap unit...(March 5th, 2019)
• 11772-02 Armstrong Draft Inducer Blower For Gas Furnaces Fasco (24.1% similar) Good condition...(May 8th, 2018)
• 1746569160 Fasco Inducer Blower Motor Assembly 00822529347134 (34.8% similar) ...(April 13th, 2018)