GE 5KCP19DG528T Ac Motor Rpm 115V 1/12 1600

( Brand: Ge ), ( Manufacturer Part Number: 5KCP19DG528T ), ( Type: Motor ), ( Power Frequency: 60 Hz ), ( Power Source: Corded Electric ), ( Item Diameter: 3.85 In ), ( Voltage: 115 V ), ( Amperage: 1.7 A ), ( Item Length: 3.55 In ), ( Country Of Origin: United States ), ( Power Phase: 1 Phase )

Review GE 5kcp19dg528 Ac Motor 115v 1/12 Hp Rpm 60 Hz

The **GE 5KCP19DG528T (and its variant, the 5KCP19DG528)** is a compact yet robust **single-phase, permanent-split capacitor (PSC) AC induction motor**, engineered for reliability, efficiency, and versatility in a wide range of industrial, commercial, and residential applications. Designed with GE s legacy of precision engineering, this motor delivers **1/12 horsepower (0.082 kW)** of continuous output while operating at a nominal **1600 RPM** under standard conditions, making it ideal for applications requiring moderate torque and speed consistency. Powered by a **115V single-phase AC supply at 60Hz**, it ensures seamless integration into standard electrical systems without the need for additional voltage conversion or complex wiring configurations. The motor s **permanent-split capacitor** design eliminates the need for external starting mechanisms, simplifying installation and reducing maintenance overhead while maintaining smooth, efficient operation from startup to full load.

Constructed with **high-quality materials**, including a **die-cast aluminum or steel housing**, the 5KCP19DG528T is built to withstand environmental challenges, offering **IP54 protection** against dust and splashing water, which makes it suitable for both indoor and lightly exposed outdoor environments. Its **ball-bearing support system** ensures low friction and extended operational life, while the **shaded-pole or capacitor-run rotor** provides consistent performance across varying load conditions. The motor s **NEMA Premium efficiency rating** (or equivalent) further enhances its energy-saving capabilities, reducing operational costs while minimizing environmental impact a critical consideration for cost-conscious applications such as HVAC systems, small machinery, appliances, fans, pumps, compressors, and automated equipment.

Measuring approximately **3.5 inches in diameter and 3.75 inches in length** (with slight variations depending on mounting configuration), this motor s **compact frame size (likely a NEMA 14 or similar standard)** allows for easy integration into tight spaces without compromising performance. The **standard shaft extension (typically inch or inch diameter)** is precision-machined for smooth operation and can accommodate various coupling or pulley systems, while the **flanged or foot-mounted base** ensures secure and stable installation. Additionally, the motor s **low noise output** and **vibration-dampening design** contribute to quieter operation, making it well-suited for applications in sensitive environments such as offices, healthcare facilities, or residential settings.

For enhanced functionality, the 5KCP19DG528T (and its variant) often includes **built-in thermal protection**, such as a **thermal overload relay or thermal cutout**, which automatically shuts down the motor in the event of overheating, preventing damage and extending its lifespan. The motor s **universal compatibility** with standard electrical controls and its **plug-and-play design** further simplify integration into existing systems, reducing downtime and installation complexity. Whether used in **industrial automation, commercial refrigeration, small-scale manufacturing, or consumer electronics**, this motor exemplifies GE s commitment to delivering a **durable, efficient, and dependable** solution that meets the demands of modern applications while adhering to strict industry standards for performance and safety.

### **Pros and Cons of buying a GE 5KCP19DG528T (1/12 HP, 115V, 1600 RPM, AC Motor)**

1. **Reliable Brand Reputation** GE is a well-established manufacturer known for durable and dependable electric motors, making this a trusted choice for industrial and commercial applications.

2. **Standardized Specifications** The motor meets common NEMA frame sizes (likely NEMA 56) and operates at 115V, making it compatible with standard US electrical systems without additional voltage conversion.

3. **Compact and Lightweight** At 1/12 HP (approximately 0.083 kW), this motor is small and lightweight, ideal for applications where space and weight are concerns, such as fans, small machinery, or appliances.

4. **High RPM (1600 RPM)** The 1600 RPM speed is suitable for applications requiring moderate rotational speed, such as small blowers, pumps, or conveyor systems where higher speeds improve efficiency.

5. **Cost-Effective for Low-Power Needs** For applications requiring minimal power (e.g., small ventilation systems, air purifiers, or light-duty machinery), this motor offers a balance of affordability and performance.

6. **Easy to Install and Replace** Standard NEMA mounting and wiring make it straightforward to integrate into existing setups, reducing installation time and complexity.

7. **Long Lifespan with Proper Maintenance** Like most GE motors, this unit is built to last with basic upkeep, such as lubrication and regular inspections.

8. **Compatibility with Variable Frequency Drives (VFDs)** If your application requires adjustable speed control, this motor can often be paired with a VFD, though compatibility should be verified with the specific VFD model.

9. **Wide Availability** As a common industrial component, spare parts and replacements are readily available, reducing downtime if repairs are needed.

10. **Energy Efficiency for Low-Load Applications** While not classified as a premium energy-efficient motor, it performs adequately for light-duty tasks where energy consumption is not a major concern.

---

1. **Low Power Output (1/12 HP)** This motor is extremely low-powered, meaning it may struggle with heavy loads, high-resistance applications, or tasks requiring sustained torque. It is not suitable for demanding industrial processes.

2. **Limited Torque** At 1600 RPM, the torque output is low, which could lead to inefficiency or failure if used in applications requiring high starting torque (e.g., compressors, positive-displacement pumps, or machinery with high inertia).

3. **No Energy Efficiency Rating** Unlike newer motors with Energy Star or IE3/IE4 ratings, this motor does not prioritize energy efficiency, which could result in higher operational costs over time for continuous use.

4. **Potential for Overheating in Heavy Use** Without active cooling or proper ventilation, the motor may overheat if operated near its maximum capacity for extended periods, reducing its lifespan.

5. **Deprecated Technology** This motor likely uses older design standards (e.g., squirrel-cage induction motor without advanced features like digital diagnostics or brushless design), which may lack modern efficiency or reliability improvements.

6. **Noise and Vibration** Low-power motors can sometimes produce more noise and vibration due to less precise balancing or simpler construction, which may be noticeable in sensitive applications.

7. **Limited Customization** Unlike higher-end motors, this unit does not offer options for custom speed control, enclosure types (e.g., explosion-proof), or advanced protection features.

8. **Potential Compatibility Issues** If the motor is used in a non-standard application (e.g., high-altitude environments or extreme temperatures), performance may degrade without additional modifications.

9. **No Built-In Diagnostics** Unlike modern motors with fault detection capabilities, this motor lacks sensors or indicators to alert users to issues like bearing wear or winding problems until failure occurs.

10. **Environmental Considerations** Older motors may not meet current environmental regulations for efficiency or emissions, though this is less relevant for small, low-power units.

---

The **GE 5KCP19DG528T (1/12 HP, 115V, 1600 RPM)** is a **practical and cost-effective choice for light-duty applications** where minimal power, compact size, and reliability are prioritized over efficiency or high torque. It excels in scenarios such as:

- Small fans or ventilation systems.

- Light-duty machinery (e.g., small conveyors, air purifiers, or appliances).

- Replacement motors for older equipment where exact specifications are required.

- Prototyping or low-volume production where power demands are low.

- Higher horsepower motors (e.g., 1/6 HP or above).

- Motors with energy efficiency certifications (e.g., IE3 or IE4).

- Motors with built-in protections (e.g., thermal overload, digital diagnostics).

If your application falls within the motor s intended use, it is a **solid, budget-friendly option**. For more demanding tasks, investing in a slightly higher-rated motor may yield better long-term performance and cost savings.

---

- You need a **small, low-power AC motor** for a simple application (e.g., a fan, light conveyor, or appliance).

- You require a **reliable, off-the-shelf replacement** for existing equipment.

- Your budget is limited, and you prioritize **upfront cost over energy efficiency**.

- The motor s **1600 RPM and 1/12 HP** meet your speed and power requirements exactly.

- Your application requires **high torque, frequent starts/stops, or heavy loads**.

- You operate the motor **continuously at or near full load**, as efficiency and lifespan may suffer.

- You need **energy-efficient or premium-performance** motors for long-term cost savings.

- The motor s **lack of advanced features** (e.g., diagnostics, VFD compatibility) is a concern.

For most **light-duty, low-power needs**, this GE motor is a **decent and affordable solution**. For anything more demanding, explore higher-rated or more modern alternatives.

Details:

Milwaukee 48-39-0572 27 18 TPI Sub Compact Steel Band Saw Blade 3 Pack. GE 5KCP19DG528 AC Motor - 115V 1/12 HP 1600 RPM 60 Hz. Please see photos. Product details: N/A.

Items Not Included. Shipping: Shipping is offered Thru UPS, FedEx and USPS only. Items Included. Item condition: This item is Used.

This item was pulled from working equipment but the plug was slightly damaged. UPS/FedEx doesn't deliver to a P.O. Anything not listed above.

part #: 5kcp19dg528t prices

• $49.95-$311.54

specifications fablowehva:

• brand: Ge
• mpn: 5kcp19dg528t
• type: Motor
• power frequency: 60 Hz
• power source: Corded Electric
• item diameter: 3.85 In
• voltage: 115 V
• amperage: 1.7 A
• item length: 3.55 In
• country of origin: United States
• power phase: 1 Phase

returns fablowehva:

• time: 30 Days
• policy: Returns Accepted
• method: Money back
• paid by: Buyer

shipping fablowehva:

• carrier: UPS, USPS
• type: Calculated
• service: UPS Ground, USPS Ground AdvantaGe, USPS Priority Mail
• class: Standard, Expedited
• transit: 3-7 Days
• cost: $17.35

offer fablowehva:

• sold: 0
• best offers: True
• started: March 18, 2026
• options: Ship-to-home
• quantity: 1
• availability: In Stock

payments fablowehva:

• credit card: Mastercard
• other
• wallet: Paypal

seller fablowehva:

• city: Pembroke, Massachusetts
• rating: 100.0%
• # reviews: 3964

General fablowehva:

• HVAC RefriGeration > HVAC RefriGeration: Parts Accessories > HVAC RefriGeration: Fans Blowers
• condition: Used

Ge 5KCP19DG528T Is Similar To:

• 1176932 Ge Genteq Icp Fast Parts New Hp Blower Motor Rpm (29.5% similar) Note: wires are included as shown in photos. See tag pics for all specs x make sure all specifications match your motor. New in factory box Ge Gent eq 1/2 hp 3 speed direct drive indoor furnace blower PCs motor. So don't hesitate, and. 9 amp, 60HZ, 1075 rpm, counter clockwise cc rotation. This motor...(April 20th, 2018)
• 121334 Lennox Ge Fan Motor (19.6% similar) Good condition working fan motor off a Lennon condensing unit that was replaced because of leak. The cover for electrical is missing and shown in photo. The motor runs smooth. Must be installed by a licensed hvac technician...(October 5th, 2018)
• 21a115469-p01 Ge Mod Furnace Blower Motor Rpm Amps (31% similar) Buyer pays return shipping. For vertical mounting only. 35RPM: 1625HP: 1/5 equipment mfrs: 21A115469-P01 this is a new part. Box is in rough condition. Ge thermally protected furnace motor. Shipping: buyer pays listed shipping costs...(April 24th, 2018)
• 21a308988p01 Ge Fan Motor (19.8% similar) Must be installed by a licensed hvac technician. Good condition working fan motor off a furnace that was replaced for rebates on new equipment...(June 24th, 2018)
• 24x327053 Ge Fan Motor (20.5% similar) Good condition working fan motor off a condensing unit that was replaced for rebates on new equipment. Must be installed by a licensed hvac technician...(May 12th, 2018)
• 32842 Lennox Ge New Blower Motor Hz Hp Rpm Nib Speed (33.9% similar) Item is new in the original box. Fantastic find from the estate of a retiring hvac dealer. Box may show signs of shelf wear, but item is new. Almost impossible to find one at this price anywhere, so hurry before it is gone...(February 26th, 2018)
• 3386 Ge Psc Motor Hp Rpm Ph Sp Hvac (39.6% similar) Plus, I reserve the right to charge a return fee of 20 items cost 5 minimum cover my fees and time.: 1/2 shaft length : 4 rot. 9SHAFT diam. If you make a mistake and want to return it, pay shipping both ways. To operate with integrity so that you can be assured of anything I have for sale. 30 my ...(May 29th, 2018)
• 3730 Ge Electric Fan Motor (28.3% similar) New Ge fan motor in original box includes capacitor weight is lbs 14X7X7...(November 4th, 2017)
• 3k116 Ge Neral Electric Hp Rpm Ball Bearing Never Used Motor (19% similar) 9 amps ball bearing, pe shaft. 1725 rpm, single phase, 115V. Ge motor purchased for furnace barrel blower 1/6 hp. Of address confirmation via USPS...(April 23rd, 2018)
• 4733 Ge Hp Rpm Belt Driven Blower Motor (24.8% similar) Furnace blower, belt drive features ball bearings reversible rotation 48Y frames have mounting holes for both 48 and 56 frame selected energy saver designs available applications designed replacement of virtually any Norma blower motors. PDQ model's have extended splinted hub on opposite shaft end ...(March 31st, 2019)
• 4779 Ge Commercial Motors General Electric Oil Burner Motor (24% similar) This item was never opened but has plenty of shelf wear. Specs of the motor include 1/7 hp, 115 volt, 3450 rpm, single phase and is a 48M frame...(December 17th, 2018)