DAYTON 4C661A Tubeaxial Belt Drive Fan Motor

( Brand: Dayton ), ( Manufacturer Part Number: 4C661A ), ( Part Type: Fan Belt Drive Motor )

Review DAYTON Inch Tubeaxial Belt Drive Fan Motor used

The **Dayton 4C661A 18" Tubeaxial Belt Drive Fan Motor (Used)** is a robust, high-performance industrial fan motor designed for applications requiring efficient airflow and reliable operation in demanding environments. This model features a **18-inch tubeaxial impeller**, optimized for axial airflow delivery, making it ideal for ventilation systems, exhaust applications, or general-purpose air movement in commercial, agricultural, or light industrial settings. The **belt-driven design** ensures smooth, low-vibration operation while reducing wear on the motor and impeller over time, contributing to extended longevity compared to direct-drive alternatives. Built with a **durable cast-iron housing**, this motor is engineered to withstand harsh conditions, including exposure to dust, moisture, and temperature fluctuations, though it is important to note that it is a **used unit**, so it may show signs of wear such as minor surface rust, slight belt degradation, or potential wear on internal components. The motor operates on a **single-phase electrical system**, typically requiring standard 115V or 230V power depending on the specific configuration, though verification of voltage compatibility is recommended before installation.

This Dayton fan motor is particularly well-suited for applications where space efficiency and airflow performance are critical, such as in attic ventilation, greenhouse ventilation, or as part of a ductwork system for HVAC or exhaust purposes. The **18-inch diameter** allows for substantial air displacement, making it capable of handling moderate to high airflow requirements without excessive noise or energy consumption. While the motor itself is robust, the **belt and pulley system** may require periodic inspection and maintenance to ensure optimal performance, particularly if the unit has been exposed to prolonged use or environmental stressors. As a used motor, it offers a cost-effective solution for projects where budget constraints or replacement needs arise, provided that thorough inspection and testing are conducted to confirm its operational integrity before integration into a system. Proper lubrication of the bearings and tensioning of the belt will further enhance its efficiency and service life, ensuring reliable performance for years to come.

**Pros and Cons of Buying a Used Dayton 4C661A 18 Tube-Axial Belt Drive Fan Motor**

### **Pros**

1. **Cost-Effective** Used motors are significantly cheaper than new ones, making them an attractive option for budget-conscious buyers, especially for industrial, HVAC, or ventilation applications.

2. **Proven Performance** If well-maintained, a used motor can still deliver reliable performance comparable to a new one, especially if it has been properly serviced.

3. **Quick Availability** Purchasing used motors can reduce lead times, which is beneficial for projects requiring immediate installation.

4. **Compatibility** The Dayton 4C661A is a well-known model, so finding replacement parts, belts, and bearings may be easier than with less common motors.

5. **Testing and Inspection** Reputable sellers often provide test reports or inspections, giving buyers confidence in the motor s condition before purchase.

### **Cons**

1. **Unknown Service History** Without full maintenance records, it s impossible to guarantee the motor hasn t been improperly repaired or overworked, which could lead to premature failure.

2. **Potential Wear and Tear** Even if the motor appears functional, internal components like bearings, brushes (if applicable), or windings may be degraded, reducing lifespan.

3. **No Warranty** Used motors typically come without warranties, meaning buyers bear all risks of failure or defects.

4. **Compatibility Risks** If the motor was previously used in a different application (e.g., with a mismatched belt or load), it may not perform optimally in its new setup.

5. **Resale Value** Used motors lose value quickly, so if further issues arise, reselling or recycling may be difficult.

6. **Safety Concerns** If the motor has been abused (e.g., overloaded, exposed to moisture, or improperly stored), it could pose electrical or mechanical hazards.

### **Conclusion**

Buying a used Dayton 4C661A 18 tube-axial belt drive fan motor can be a financially smart choice if the buyer conducts thorough due diligence. The key is verifying the motor s condition through professional inspection, load testing, and reviewing its service history. If the motor is in excellent condition and priced significantly below a new equivalent, it can be a practical solution for temporary or low-risk applications.

However, if the motor is intended for critical or long-term use, the risks of hidden defects may outweigh the cost savings. In such cases, investing in a new or refurbished motor with a warranty could be the safer long-term option.

### **Recommendation**

- **Proceed with caution** if purchasing from a reputable dealer who offers inspection reports, load testing, and a short-term performance guarantee.

- **Prioritize testing** verify voltage, current draw, bearing smoothness, and belt tension before installation.

- **Consider a refurbished motor** if available, as these often come with warranties and are closer to new condition than used units.

- **Budget for potential repairs** account for possible bearing replacements, brushes (if applicable), or winding repairs that may be needed shortly after purchase.

- **Avoid high-risk applications** do not use a used motor in safety-critical systems (e.g., fire suppression, medical equipment) without extensive validation.

Ultimately, the decision depends on the balance between cost savings and risk tolerance. For most industrial or HVAC applications, a used motor can be a viable option if properly vetted, but caution is essential.

Details:

Dayton 4C661A 18 Tubeaxial Belt Drive Fan with Motor.

part #: 4c661a prices

• $545.74-$2999.99

specifications fablowehva:

• brand: Dayton
• mpn: 4c661a
• part type: Fan Belt Drive Motor

offer fablowehva:

• best offers: True
• quantity: 2
• started: April 10, 2026
• sold: 0
• availability: In Stock
• options: Ship-to-home

payments fablowehva:

• wallet: Paypal
• other
• credit card: Mastercard

general fablowehva:

• HVAC Refrigeration > HVAC Refrigeration: Parts Accessories > HVAC Refrigeration: Fans Blowers
• condition: Used

seller fablowehva:

• # reviews: 14511
• rating: 99.9%
• city: Detroit, Michigan

returns fablowehva:

• method: Money back
• time: 30 Days
• paid by: Buyer
• policy: Returns Accepted

shipping fablowehva:

Dayton 4C661A Is Similar To:

• 1 4m074a Dayton Fan And Blower Motor (34.3% similar) Dayton fan and blower motor 1/4 M074A 70 hp 3000 rpm 230V 60 Hz cw 3/1 6 diameter x shaft this is a new item. The box has been opened. This item is sold as. I cannot give technical advice...(July 26th, 2018)
• 10c903 Dayton Vibrator Motor 1-100 (37.5% similar) ...(October 28th, 2017)
• 10d952 Dayton Exhaust Fan In Cfm (34% similar) F 104 height in. Ambient temp. Great for ventilating schools, offices, storage facilities, and light manufacturing assembly areas. 375-IN 4VENTURI clearance DOA. 6FAN voltage 115VACEXHAUST supply fan item exhaust FANHZ60PHASE1FULL load AMPS0. 42 lbs country of origin china item exhaust duty ...(April 22nd, 2018)
• 10d954 Dayton Exhaust Fan 12 (33.3% similar) Ambient temp. 6, fan voltage 115, drive package included no, 60 Hz, 1 phase, full load amps in. 6, exhaust supply fan motor hp 1/3 0, totally enclosed air over, bearing type sleeve, rpm 1664, max. Sp 753, sines. F 104, height in. Exhaust fan, medium duty direct drive, blade DOA. Sp 912, cfm . ...(September 29th, 2017)
• 10d956 Dayton New Direct Drive Exhaust Fan (40.4% similar) Part: 115VAC prices...(April 22nd, 2018)
• 10d958 Dayton Medium Duty Direct Drive Exhaust Fan Hp (40% similar) Include intake guards. We ask you to please review all photos and the of items condition prior purchase. Features ball bearings. Speed controller no. 48C172 sold separately. Quiet speed-controllable fans for schools, offices, and light manufacturing assembly areas. Shipping cost: expedited options ...(November 6th, 2018)
• 10d958d Dayton Medium Duty Direct Drive Exhaust Fan With Blade Dia (45.3% similar) 24 x 115ACV medium duty direct drive exhaust fan with 20 blade DOA...(July 3rd, 2018)
• 10d971 Dayton Exhaust Fan 16 (33.3% similar) Please see last picture in the series, there is a small inclusion on metal piece that surrounds fan. This is new old stock. If you make a mistake and want to return it, pay shipping both ways. The items I sell are not to test your equipment see if it works. This is no way effects the fan or its ...(January 18th, 2018)
• 10d979 Dayton Commercial Direct Drive (40.4% similar) Brand new with minor scratches never been installed...(June 20th, 2017)
• 10d987 Dayton Industrial Direct Drive Exhaust Fan Hp (47.4% similar) Dayton industrial direct drive exhaust fan 24 x 230VBLADE 20 motor 3/4 hp...(May 25th, 2018)
• 10d988 Dayton Hp Exhaust Fan (33.3% similar) 5, full load amps, 373 watts , 60HZ, aluminum blades. Inventory: BLO1177 manufacturer: Dayton blower model 10D988 cfm : hp...(July 11th, 2018)